Verifying Every Step. Excellence in Every Part.

At Rahco Rubber, quality is engineered into every stage of the manufacturing process, not just something we inspect as a finished part. From raw material verification, compounding, molding through final dimensional inspections, our ISO-certified quality system combines advanced testing equipment, PLC (Programmable Logic Controller) process controls, and decades of manufacturing expertise to ensure every molded component performs exactly as per our customer’s specifications.

Every order follows a structured quality verification process designed to deliver consistent, defect-free rubber components with dependable performance. Throughout manufacturing, critical dimensions, material properties, and process parameters are continuously monitored and documented to ensure consistency and complete traceability.

For OEMs, this means more than receiving parts that meet print. It helps reduce production disruptions, warranty claims, and the risk of costly field failures while protecting your brand and reputation. The result is reliable components that move directly from our dock to your production line with confidence.

Quality Performance Metrics

Our Quality Commitment

Rahco Rubber is committed to delivering products that consistently meet or exceed customer expectations. Through continual investment in our quality systems, equipment, employee training, and manufacturing processes, every member of our team plays an active role in maintaining the highest standards of precision, performance, and reliability.

Our ISO 9001: 2015 certified quality management system, registered through DNV, provides the framework for continuous improvement while ensuring every product is manufactured to rigorous quality standards.

Three Critical Questions. Three Advanced Verification Systems.

Producing consistent, high-performance molded rubber components requires far more than a final visual inspection. Quality must be verified throughout the manufacturing process—from the rubber compound before molding, to the cured material, to the finished part.

At Rahco Rubber, every production run is validated by answering three critical questions:

  1. Is the rubber compound correct before molding?
    YES.  It is verified using a Moving Die Rheometer (MDR).
  2. Does the cured material meet the required mechanical properties?
    YES.  It is verified using a Tensometer (Tensile Testing Machine).
  3. Does the finished component meet every dimensional requirement?
    YES.  It is verified using our Micro-Vu Automated Vertex 320 Vision Measurement System.

Together, these three advanced quality systems verify every stage of manufacturing—from raw compound through finished component—providing customers with confidence that every shipment will perform consistently in production and in the field.

Step 1: Moving Die Rheometer (MDR)

Validating Rubber Compound Consistency Before Production
All OEMs demand consistency, reliability, and performance. At Rahco Rubber, the first step in our quality assurance process begins before a single production part is molded. Our Moving Die Rheometer (MDR) serves as a critical quality checkpoint, verifying that each batch of rubber is compounded correctly, meets formulation requirements, and will cure predictably during the molding process.

By validating material properties before production begins, the MDR ensures every production run starts with a compound capable of delivering consistent, high-quality components. This testing provides confidence that strict processing requirements have been followed and that each batch is ready to produce reliable parts that perform as intended.

What a Rheometer Measures
Using our advanced Moving Die Rheometer (MDR), we measure how a rubber compound’s stiffness (torque) changes over time under controlled temperature conditions during curing (ASTM D6601). This generates a precise cure curve, allowing us to determine:

  • Scorch time (ts2): Processing safety window before curing begins
  • Optimum cure time (t90): Ideal cure point for molding
  • Minimum torque (ML): Uncured viscosity and processability
  • Maximum torque (MH): Final stiffness and crosslink density
  • Cure rate profiles: Speed of vulcanization

We also evaluate dynamic properties such as storage modulus and loss modulus, giving deeper insight into material behavior.

Ensuring Batch-to-Batch Consistency
Rheometer testing is performed as part of our process control to ensure that

  • Every batch matches the established material “fingerprint”
  • Raw materials are accurately selected, weighed, and the right amount per formula is processed using a computer-controlled system with detailed mixing procedures to achieve the intended outcome
  • Compounds flow properly into complex mold geometries within the allotted time

This best practice prevents molding defects, helping us consistently deliver complete orders on time.

Why This Matters to You
Without proper rheological control:

  • Inconsistent cure behavior can lead to scrap, delays, and inefficiency
  • Undercured parts can be weak, tacky, or fail prematurely
  • Overcured parts can become brittle and crack

Rahco’s rheometer-driven QA ensures:

  • Repeatable part performance across every lot
  • Optimized processing and cure cycles
  • Risk of defects and field failures are mitigated
  • Confidence that parts meet specification—every time

A System Built for Reliability
Our quality system is structured to ensure all materials, tooling, and processes support superior quality and manufacturing efficiency. With real-time data, repeatable testing, and historical comparisons, we maintain tight control over every compound we produce.

QA at Rahco Rubber isn’t just checking—it’s guaranteeing quality.
Tired of unreliable offshore sourcing and unexplained field failures? Get defect-free parts shipped on time and in full, backed by a Certificate of Analysis with every order. Contact Rahco Rubber today for quality you can verify.

Step 2: Tensometer Testing for Verified Performance and Reliability

Verifying Mechanical Performance After Curing

At Rahco Rubber, the tensometer plays a key role in our quality assurance process. While rheometers show how a compound cures, the tensometer measures how the finished rubber part performs under stress. It provides final validation, ensuring your compound delivers the physical properties required for mechanical strength, elasticity, and durability in its intended application.

What a Tensometer Measures
Using tensile testing, a molded rubber test specimen (commonly known as a “dog bone” ASTM D412)  is stretched at a controlled rate to evaluate its full mechanical behavior. This produces a stress-strain curve, giving us a complete profile of the material’s performance.

Key properties measured include:

  • Tensile strength – maximum stress before failure
  • Elongation at break – how far the material stretches before breaking
  • Modulus – stiffness at defined elongation levels
  • Tear resistance
  • Overall stress-strain characteristics

These measurements confirm that the molding process has produced the required balance of strength, flexibility, elasticity, and durability.

Ensuring Every Part Meets Specification
In QA, tensometer testing is used as a routine audit tool for fully cured samples to confirm:

  • Batch-to-batch consistency after molding
  • Compliance with customer specifications
  • Proper curing from molding conditions (time, temperature, pressure)

Why This Matters to You
Tensometer testing verifies that every batch meets your specifications for tensile strength, elongation, and modulus. This validation helps maintain consistent material properties, reduce the risk of field failures, and confirms that every part performs as intended—whether the material is mixed in-house or toll-compounded by an ISO-certified supplier.  By confirming these critical performance characteristics, you can have greater confidence in the reliability, durability, and quality of your materials.

Rahco’s tensometer-driven QA delivers:

  • Consistency across every production lot
  • Verified—not assumed—mechanical performance requirements that comply with customer specifications
  • Reduced risk of failure in the field
  • Proper curing during molding
  • Reliable long-term performance

Rather than assuming the material meets specification, Rahco verifies performance using measurable engineering data.

Confidence Built Into Every Part
Tensile testing is fundamental to ensuring performance, reliability, and safety. By validating critical performance, Rahco gives OEMs the confidence that their rubber components will perform as intended under real-world conditions.

We don’t just test materials—we verify performance.
If you’re wondering why your parts are tearing prematurely, contact us today. We offer complimentary testing to improve performance, extend product life, and reduce the risk of failure.

Step 3: Micro-Vu Automated Vertex 320 Vision Measurement System

Verifying Dimensional Accuracy

After confirming both the rubber compound and the material’s physical properties, the final step is ensuring that every substrate that is to be overmolded meets its dimensional requirements.

Rahco performs this inspection using its fully automated Micro-Vu Automated Vertex 320 Vision Measurement System. This advanced “touch-free” optical measurement system provides fast, accurate, non-contact dimensional inspection using programmable routines and CAD-based measurement software. By eliminating the variability associated with manual measurements—including differences in operator technique and the potential for compressing rubber surfaces—automated inspection delivers exceptional accuracy, repeatability, and dimensional consistency throughout production.

The system automatically verifies critical features including:

  • Inside and outside diameters
  • Profiles and contours
  • Hole locations
  • Radii
  • Grooves
  • Heights
  • Complex geometric features

Why It Matters
Verifying via touch free or non-contact dimensional accuracy before shipment helps ensure:

  • Compliance with engineering drawings
  • First article inspection validation
  • Batch-to-batch consistency
  • Proper fit and assembly
  • Confidence that every component performs exactly as designed

The Micro-Vu Vision System completes Rahco’s quality verification process by confirming that all rubber molded components meet the customer’s dimensional requirements before it leaves our facility.

Complete Quality Verification

Each inspection system serves a unique purpose, but together they create a comprehensive quality assurance process.

  • The Moving Die Rheometer (MDR) verifies the rubber compound before molding.
  • The Tensometer validates the cured material’s mechanical properties.
  • The Micro-Vu Vision System confirms the dimensional accuracy of every finished component.

By verifying quality at every critical stage of manufacturing, Rahco identifies potential issues early and maintains the controlled processes required to produce consistent, high-performance rubber components. PLC (programmable logic controller) systems continuously monitor and regulate key molding parameters, including temperature, pressure, cure time, and machine sequences, ensuring repeatable production conditions from cycle to cycle.

This disciplined approach minimizes process variation, improves manufacturing consistency, and helps ensure every molded rubber component meets demanding specifications with reliable, repeatable performance.

Quality at Rahco isn’t simply inspected—it is engineered, measured, validated, documented, and continuously controlled throughout the manufacturing process.

Quality You Can Measure. Reliability You Can Trust.

Whether you’re replacing an underperforming supplier, launching a new product, or reducing field failures, Rahco Rubber provides the manufacturing expertise, testing capabilities, and quality systems needed to deliver dependable molded rubber components with confidence.

Every shipment is backed by documented quality verification and a Certificate of Analysis, giving you assurance that every part meets your specifications before it reaches your production line.

Quality Assurance at Rahco Rubber isn’t just inspection—it’s verification at every stage of manufacturing.  For high-quality rubber parts, components, and assemblies, contact us today.