FLAS® is the tradename for a unique fluoroelastomer based upon an alternating copolymer of tetrafluoroethylene and propylene (TFE/P). The elastomer, when properly formulated, can be used to fabricate o-rings, gaskets, seals, packings, and coatings possessing several unique properties:
- excellent heat resistance with continuous service temperature capability of 230C,
- chemical resistance including resistance to strong acids and bases,
- high electrical resistivity, and
- excellent oil resistance.
AFLAS® fluoropolymers must be formulated with fillers, curatives, and other chemical agents. Properly formulated and cured AFLAS products deliver outstanding results in many operating environments. Results using AFLAS fluoropolymers may vary depending upon the fabricator’s formulation, manufacturing process, and proper application to the operating environment.
- Resistant to highly reactive organic and inorganic chemicals
- Excellent volume resistivity (greater than 1016Ω cm)
- Radiation resistance up to 200 MRad of gamma-ray radiation
- Unaffected by extended exposure to 200 °C steam
- Continuous use at 230 °C
- Resistant to highly reactive organic and inorganic chemicals
The following properties of AFLAS® copolymers make a popular choice for various sealing applications.
- Chemical Resistance: The AFLAS® rubber sheet can resist a wide range of chemicals including amines/bases, acids, and steam. In recent years, it has become a suited replacement for Viton in a wide range of applications where it may be exposed to a wide range of automotive fluids including engine coolants, motor oils, corrosion inhibitors, EP gear lubricant, steering fluids, and so on. The material can also withstand a wide range of brake fluids such as silicone oil, mineral oil, and DOT 3.
- Low-temperature Properties: Many AFLAS® grades such as 100S and 150P have brittle temperatures around -40 degrees Celsius. This temperature will differ according to the composition. This proves its ability to be used in low-temperature applications.
- Low Aromatizing Properties: AFLAS® has low aromatizing properties. Thus, seals and gaskets made of AFLAS rubber sheets are a part of food and pharmaceutical production lines, where aroma can be a big concern.
- Excellent Thermal Properties: AFLAS® is known for its excellent heat resistance. It can withstand consistent temperatures up to 200 degrees Celsius. Some grades can even withstand temperatures as high as 250 degrees Celsius. This makes them ideal for superheated steam applications.
- Ideal Flame Resistance: Seals and gaskets made from AFLAS® rubber sheet will burn if directly exposed to flames. This stops immediately when removed from the flame.

